Jay Wenger
New User
I aquired a 320B about a year ago and the starter went out shortly after I got it. I took it to the local armature shope and after he went through it, he said it was shot and he could rebuild or find a new one with a warranty. I went for the later option. Got the new starter a few months ago and now that the weather broke had a chance to get out and put it on and its not even close....
The starter gear and the nose of the starter are about 1.5 centemeters to short so the starter gear will barely even touch the flywheel at best. Long story short, after going around with the local shop he put me in contact with his supplier and they just told me today they do not have stock or any cores to build the unit I need. I basically need a starter with 4.5 to 5cm of reach to enguage the flywheel properly.
I have searched high and low and contacted numerous equipment dealers and parts suppliers with no luck. Does anyone reccomend a good place that may be able to help or have any reccomendations? Any help would be really appreciated. I am totally lost on this one.
The starter gear and the nose of the starter are about 1.5 centemeters to short so the starter gear will barely even touch the flywheel at best. Long story short, after going around with the local shop he put me in contact with his supplier and they just told me today they do not have stock or any cores to build the unit I need. I basically need a starter with 4.5 to 5cm of reach to enguage the flywheel properly.
I have searched high and low and contacted numerous equipment dealers and parts suppliers with no luck. Does anyone reccomend a good place that may be able to help or have any reccomendations? Any help would be really appreciated. I am totally lost on this one.