FarmerDan80
New User
I am trying to find a corn head to fit my CASE 660 combine. Does anyone have any leads or suggestions on where to call?
402 isn't too bad for chains. 404 has more...have 3 402 two row wide heads here and have used them. Actually work pretty good.Those have a mile of roller chains, I had 2 but went to scrap years ago.
If you can find one there’s additional parts you’ll need to be able to make it work. The door above the feeder house is smaller and there’s a different bracket for the lift cylinder under the feeder house also.I am trying to find a corn head to fit my CASE 660 combine. Does anyone have any leads or suggestions on where to call?
If you can find one there’s additional parts you’ll need to be able to make it work. The door above the feeder house is smaller and there’s a different bracket for the lift cylinder under the feeder house also.I am trying to find a corn head to fit my CASE 660 combine. Does anyone have any leads or suggestions on where to call?
Hi Farmer Dan, we still have all our case combine stuff. I don't log on much so just happened to log on today. I will do better since there is some interest. I have a good 660, a parts 660, a good corn head, a fair grain table and a parts corn head. Two new sets of rub bars. Would prefer to sell the whole shabang...we retired from row cropping in 2024.I am trying to find a corn head to fit my CASE 660 combine. Does anyone have any leads or suggestions on where to call?
I wouldnt be interested in all that stuff, but if those are the late model heads I would be interested if dan isn't.Hi Farmer Dan, we still have all our case combine stuff. I don't log on much so just happened to log on today. I will do better since there is some interest. I have a good 660, a parts 660, a good corn head, a fair grain table and a parts corn head. Two new sets of rub bars. Would prefer to sell the whole shabang...we retired from row cropping in 2024.
Hi Jon, my 660 is a 1968 model and the heads fit it, if that works. The one 402 is very good, the other one is a parts one for sure. Will see what Dan is interested in if any. We are right on the Iowa/MO border, due south of Centerville, Iowa.I wouldnt be interested in all that stuff, but if those are the late model heads I would be interested if dan isn't.
Do you want to sell any of them? I am in Northwest Illinois402 isn't too bad for chains. 404 has more...have 3 402 two row wide heads here and have used them. Actually work pretty good.
I am in Northwest IllinoisWhat state are you in?
What state are you in?
Not at this time.Do you want to sell any of them? I am in Northwest Illinois
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy