case 430 wiring

[jakecase]

Im looking for a wiring diagram for my 1961 430 diesel, mine has a red lite on the dash, I think it might have been a generator light

 

[chuck machinist]

I hope you find this helpful. Diesel or gas?This is Wiring
Harness For a spark ignition 430 CM

 

[chuck machinist]

This one is for the diesel model. CM

 

[jakecase]

Thats great very helpful...thank you

 

[homer-32]

(quoted from post at 16:57:03 01/14/21) This one is for the diesel model. CM
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto71238.jpg">

Hi Chuck -
I've been searching for a diagram like this for my 6 volt 211B, as my parts manual doesn't number the wires. Would you have a 211B diagram as well? Also, what type of manual is this diagram from? Thank you!

 

[chuck machinist]

(quoted from post at 07:51:23 02/12/21)

(quoted from post at 16:57:03 01/14/21) This one is for the diesel model. CM
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto71238.jpg">

Hi Chuck -
I've been searching for a diagram like this for my 6 volt 211B, as my parts manual doesn't number the wires. Would you have a 211B diagram as well? Also, what type of manual is this diagram from? Thank you!

I do not have a service manual for the 211-b, I suggest that you give John Saeli a shout 315-585-9826 .I hope you find this helpful, Do you have a service Manual.CM

 

[jakecase]

(quoted from post at 05:19:36 02/13/21)

(quoted from post at 07:51:23 02/12/21)

(quoted from post at 16:57:03 01/14/21) This one is for the diesel model. CM
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto71238.jpg">

Hi Chuck -
I've been searching for a diagram like this for my 6 volt 211B, as my parts manual doesn't number the wires. Would you have a 211B diagram as well? Also, what type of manual is this diagram from? Thank you!

I do not have a service manual for the 211-b, I suggest that you give John Saeli a shout 315-585-9826 .I hope you find this helpful, Do you have a service Manual.CM

because mine was a complete basket case I used the diagrams above as a guide and wired it the way wanted it to work so far works great, but again I want to say thanks to all the help I have received here.