Hey all new to this group and my case. I have a problem with the 3 point hydraulics. 1 day it was working fine then the next day wouldn't do anything. I checked the hydraulic fluid at least I hope I checked the right hole. The dip stick on the left below the battery. It wasn't showing up on the dip stick so I added it till it was on the line of the dip stick. I fired it up and went to start raising and lowering the 3 point after a few times it started jumping like it had air in the system then it started pushing fluid from behind the 3 point arms and the shifter seal. Any help would be appreciated thank ya