Case 530 Industrial

Dear Chuck, I doubt that Jerome Increase Case ever put out any literature stating an engines cubic inch displacement in metric terms. (maybe in overseas sales)
When I was growing up in the 50's 60's and 70's here in the good old US of A. Most vehicles were known for their engine size, 1955 Chevrolet finally learned how
to cast the 265 cubic inch V-8. Later came the 283, 327, 350 409 454, there was a short run of a 348 wedge fire, a lemon for the bow tie people. I'm sure I
missed some. Ford numbers I'm not much good at 289 292 352 the 289 was a hot one, the 292 was used in pick-ups. Mopar, 318, 383 are numbers that jump out of my
old mind. But I just wanted to remind you cubic inches mattered in the war betwenn the tractor producers of the time more cubes usually equaled more horsepower
and it was never referred to as 2,3 liter or 3.2 liter. Just had to rattle your chain, get on your case. give you a load of c_ap about the famous 188 J.I. Case
engine. blessings to you my friend. gobble
 
(quoted from post at 23:41:01 10/03/23) Dear Chuck, I doubt that Jerome Increase Case ever put out any literature stating an engines cubic inch displacement in metric terms. (maybe in overseas sales)
When I was growing up in the 50's 60's and 70's here in the good old US of A. Most vehicles were known for their engine size, 1955 Chevrolet finally learned how
to cast the 265 cubic inch V-8. Later came the 283, 327, 350 409 454, there was a short run of a 348 wedge fire, a lemon for the bow tie people. I'm sure I
missed some. Ford numbers I'm not much good at 289 292 352 the 289 was a hot one, the 292 was used in pick-ups. Mopar, 318, 383 are numbers that jump out of my
old mind. But I just wanted to remind you cubic inches mattered in the war betwenn the tractor producers of the time more cubes usually equaled more horsepower
and it was never referred to as 2,3 liter or 3.2 liter. Just had to rattle your chain, get on your case. give you a load of c_ap about the famous 188 J.I. Case
engine. blessings to you my friend. gobble


HEE HEE! Thank you for the education ! I should hear from Kevins Mags come November as to the status on your SC mag. We will see your SC once again run proud! CM Look what I found in my Picture ARCHIVES!
mvphoto110462.jpg
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top