case 970

[lileschad]

I have recently purchased a case 970 with a gb loader with grapple it has a 3 lever spool valve that runs off one of the auxiliaries is there any way to hard plumb this in to free up my auxiliaries? Thanks

 

[casetrader]

Probably the simpliest thing to do would be to add a electric splitter valve,you could gain one or two more outlets,may not be the cheapest,have seen these at the salvage yards for sale,but seem to sell fast.

 

[Eldo case]

Remove the main hydraulic line off the hyd. pump and install your valve in line with it. I mean hyd pump to valve then out of valve to where pressure line hooks to tractor on right side. Just don't restrict it with too small line or small hyd valve. That is what I did on mine and works good.

 

[lileschad]

So just T into the supply and return lines to run to and from my spool and thats it

 

[lileschad]

It sounds simple enough but if there is any way you could show me a picture of how you did it I would appreciate it.thanks