Case David brown 3pt hitch doesn t work

[Jerry Peiffer]

DB 990, 3pt hitch does not lift. Loader works.

 

[used red MN]

Jerry welcome to YT! Go down about 10 or so posts to
one titled ..David Brown 885 Instruction Manual-.. click
the link in the reply by Joe. On the page it takes you to
find the manual for the. ..DB Hydrostatic Power
Steering and Selectamatic Hydraulic System.. That will
probably be some helpful information for you. Since
you are a DB owner I would think it would be wise for
you to bookmark that page. Sorry I am not
knowledgeable about DBs.

 

[db4600]

There should be a rotating 3 position dial on the right
side between the fender and seat for you 3-point
settings. Im not sure of the 990 configuration, but there
is likely a three position lever behind that dial that will
select flow to 3-point or loader or hydraulic remotes.
My 4600 will not operate the loader and 3-point
together. This does not have a remote hydraulic pump so
I have to use the selector lever to select operation.
If yours has a separate pump for the loader there are
other issues. I believe the center position on the lever
runs 3-point.

 

[Jerry Peiffer]

(quoted from post at 13:48:49 07/21/23) There should be a rotating 3 position dial on the right
side between the fender and seat for you 3-point
settings. Im not sure of the 990 configuration, but there
is likely a three position lever behind that dial that will
select flow to 3-point or loader or hydraulic remotes.
My 4600 will not operate the loader and 3-point
together. This does not have a remote hydraulic pump so
I have to use the selector lever to select operation.
If yours has a separate pump for the loader there are
other issues. I believe the center position on the lever
runs 3-point.

Is it possible to get a phone number so I can talk to someone who knows what I m trying to figure out? How can I get in touch with someone? I ve gone through the stuff you mentioned, and I think it may be internal, but I want more information before I start taking things apart.