Case DC torque specs

scooter4

Member
I had asked if anyone new a couple of Case DC torque specs with no response so I am posting these I found posted in various locations. This will help them show up in search.
If you know any other specs, please add them.

flywheel 50 ftlb
clutch cover 35 ftlb
connecting rods 70 ftlb Rod bearing clearance .0015-.003
crankshaft main bearing 150 ftlb
cylinder head 75 ftlb
 
This list if from my D series service manual.
cvphoto48493.jpg
 
Thank you for the contributions.
I have been disappointed in how little of information is readily available for the Case compared to others.
Scooter
 
Good morning,
I put the rod bearing clearances, but do not know the mains if anyone has that.
Thank you,
Scooter
 
I used 70 ftlb on the oil pump to block bolts, but as I got further in the project I found comparative bolts for the engine to transmission torqued to 50 ftlb and that is probably what they should have been.
Too late, because it is already together.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top