Case Hammer mill G100-1

[Tony in SD]

I need the 6" tube from the bottom of the grinder to the center of the blower. Does anyone have an idea were I can get one.

 

[Adirondack case guy]

Your best bet is to go to your local hdw store and buy HD flexible 6" stove pipe elbows and fab a new one. That hack has been around for many years.----------------Loren

 

[Farmallb]

That metal is way heavier than stove pipe. Id say take it off and take it to a sheet metal shop and have them make one. Will cost way more than stove pipe, but will last way longer.

 

[Denny K]

How about 6" exhaust elbow from a truck or exhaust shop? Just weld them together. Should be heavy enough.

 

[Bob Bancroft]

A grain handling and storage dealer would probably have something you could work with. Whether it be solid, flexible, or elbows you can find, you're not going to get one, you're going to have to fabricate it.

 

[Denny K]

Crawford trucks or Sheehans or even Exhaust Pros should have 6" elbows and pipe if needed.