Case model 75 loader

[LJKCK]

What can anyone tell me about a model 75 loader? Were they quick-tach or removable without too much hassle? Good, bad and/or ugly about them? Would be mounted on a 930.

 

[John Saeli]

They were built by Great Bend for the '30 & 70 Series. A High Lift and heavier version of the '70 Loader. On a 930, with the pins in the lower of 3 holes, the bucket will easily go 21' up. Not Quick Detachable, but pull the 2 upper pins & 2 cyl pins, pop the hoses, support it & back away. Great loaders!! We've had 1 on a 730CK for 45 years.

 

[larkota]

(quoted from post at 08:26:46 05/31/21) They were built by Great Bend for the '30 & 70 Series. A High Lift and heavier version of the '70 Loader. On a 930, with the pins in the lower of 3 holes, the bucket will easily go 21' up. Not Quick Detachable, but pull the 2 upper pins & 2 cyl pins, pop the hoses, support it & back away. Great loaders!! We've had 1 on a 730CK for 45 years.

John could we see a couple of pictures of it?

 

[John Saeli]

I've never taken any. I can't even find a picture of it on the net. A good likeness is the Great Bend 900 Hi Master which I found.