greys417

New User
I am looking for a waukesha motor for my 36 case rc the babbit rod bearings are gone i am afraid of the condition of the rest of the bearings will consider buying entire tractor if i can find a decent motor dave 815 703 5905
 
Have you checked into having them rebuilt? Ad in Farm Collector = Paul's Rod and Bearing, Babbit Bearing Specialist, 816-587-4747 Parkville, Mo
 
Roberts Bearing Service in WV rebabbitts rods. Your crankshaft needs to measured and ground under size if its egg shaped. Hal
304-372-4136
 
Which motor?? Some of my old parts catalogs list a Wauk FK (I'll have to look later; I think some show an FKJ) as the early engine, with most using the FC, sometimes ID'd as the FC9T variation (I've seen FC variation numbers up into the high 200's, altho that doesn't preclude that some numbers could've been skipped).
And, no, I don't know the differences between the FK/FKJ and the FC9T.
 
If you've got the FC, check my post (if you haven't seen it already) under "Wauk Engines, Where To Find Parts" posted on this forum 1-17 (today) for a couple places to look if nothing turns up here or the other Case/tractor sites.
If you consider an FC out of anything else, be sure all the accessories etc are the same or that what you're getting can be used.
FC's came in thermo-syphon and water pump versions (different heads and four water pumps), mag or dist, steel (truck and ?) or cast (tractor and ?) oil pans; flywheel, flywheel hsg and ring gear are listed "variable: send eng ser #", crank and electric start,etc, etc.
It also shows a second "Starting Crank (Starting Unit) with a geared setup (driving and driven gears) and an "engaging lever" (!??!)
My 1957 parts book shows only one block and basic internal parts. With sympathy, Bud
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top