Case VAC Plowing Action

[connor9988]

<iframe width=560 height=315 src=https://www.youtube.com/embed/W47uvK3OK9U?start=511 title=YouTube video player frameborder=0 allow=accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share allowfullscreen></iframe>

 

[r.w.b.]

looks fine.nice scour on bottoms goes in ground quickly too

 

[tomturkey]

My 1950 VAC has no hydraulics other than the eagle hitch. What year had implement hydraulics? or have you made an engineering modification? Plowing looks great gobble

 

[Richard G.]

I believe there is a way to add hydraulics for cylinders like that.
I think it was a factory option.
I have a book here somewhere that shows it.
I am sure Conner will chime in about that.

 

[connor9988]

Mine has a Prince valve plumbed into the live hydraulic circuit and tucked under the deck plate. (not factory)

I am attaching a picture of it. I will add that my hydraulic couplers need to be put in a better spot as they can be cumbersome to connect at times.

 

[connor9988]

Here is one of the double valve configurations you could have gotten. The lever bolted to the dash.

 

[connor9988]

 

[1370rod]

Nice Job! The hydraulics make for smooth plow operation.

 

[connor9988]

Thanks Rod,

I had to up the relief valve pressure as it was tripping some when lifting but not works like a charm.
Cleaned the carb and she is running pretty good.