Charging system

plow hand

Well-known Member
The amp. guage on my WD-9 shows only discharge when I turn the lights on.(tractor is running)Iam trying to determine if it is the voltage reg. or the generator,that is not working.. Where do I start..Thanks..
 
what you need is the super duper charging system checker outer information from our very own young, handsome, and multi-talented.........John T !!!!!!!!!!! here ya go!!!!!
poke here
 
You didn't provide a heck of a lot of detail but I'll assume this is not one of those take a screwdriver and turn up the genny situations? Onliest reason I ask is that, depending on the tractor, lights can drag the heck out of the electrical system. One in particular out there now comes to mind. I carry a screwdriver on the tractor just to adjust the genny up for night operation. Turning on my lights can drag the ammeter reading into the negative if I do not.
 
John T info is premium stuff, Glennster provided it below. I will ad that unless it is running 3/4 throttle or more it will not charge with the lights on no matter. Does it charge with the lights off? If so it may be as simple as a loose belt. JimN
 
I will rev it up on a warmer day with lights on and off and let everyone know... Thanks for all your input...
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top