Cleaning Round Baler

Hootie

Member
I was needing some info from you farmers. I was wondering when it comes time to clean a round baler is it best to just blow it off with air? Or would a prssure washer be better? I just feel a little worryed about throwing water on it. I know you don t want to hit the bearings with much water. Lets hear some info from you all Thanks.
 
I always oil chains after use daily, end of season use air compresser to clean as good as possible. I figure oily film on brgs, sprockets and chains keeps all rust away. this is my second round baler and is 17 years old, does up to 1000 bales per year always shedded and have yet to replace a bearing, sprocket or chain. Only problems are with belts and then usually operator error. I forget to pay attention to bale formation. Hope this helps
 
i always washed mine at a car wash at least at the end of the season. keeping it in the dry is important. dust is what makes things rust. dust sticks to metal , water sticks to dust. wash it let it dry good and then cover with cheap tarp, even inside. use air to blow off as much loose stuff as you can before applying water.
 
Dunno,

Must depend on where ya live. I just pull the hitchpin and forget the goofy things til next year. :>(

Allan

12.JPG
 
First find some pretty, good, reliable help.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/Haymaking%202008/Third%20Cutting/?action=view¤t=IMG_0023.jpg" target="_blank">
IMG_0023.jpg" width="520" Height="420" border="0" alt="Photobucket
</a>

Clean it with an air hose.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/Haymaking%202008/Third%20Cutting/?action=view¤t=IMG_0022.jpg" target="_blank">
IMG_0022.jpg" width="520" height="420" border="0" alt="Photobucket
</a>

Sweep it out.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/Haymaking%202008/Third%20Cutting/?action=view¤t=IMG_0024.jpg" target="_blank">
IMG_0024.jpg" width="520" height="420" border="0" alt="Photobucket
</a>

Paint the chains and sprockets with used motor oil.

Reward her by letting her drive her dad's 48A tractor.
Nancy s 48A
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/jEnS0gkp7Mc&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/jEnS0gkp7Mc&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 
Now Allan isn't that cheatin lining all that equipment up like that? when I pull the pin it's where I got done with it then come spring I've forgot where that was and some of the fields I can't see from the road so it takes a couple of days and a tank of fuel just to find the stuff!
 
Pressure wash or water hose are the worst things you can do to a baler. Use air only!

Bearing seals cannot keep water pressure out!
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top