cockshutt 50

[E5]

thinking about putting a 262 ac manifold on my tractor just wondering how big of a project this would be and what carb to use any ideas and help would be greatly appreciated.

 

[Irv B]

You will have to most likely adapt the air breather intake tube, choke rod and carb to govenor rod. this will depend on weather your manifold is a center carb mount or is it off set to the front. This will also effect the exaust hole in the hood. The 40 carb work well but some prefer the much larger AC carb. your preference.

 

[E5]

sorry i should have put tractor make in post.(cockshutt 50).the manifold i was looking at was off a d19ac.i assumed the exhaust hole was in the same place.is the carb linkage on the d19 on the same side as the cs50?