Cockshutt 550 diesel injection pump

[ljm]

Does anyone have any suggestions where I could get an injection pump for a Brantford built 550 diesel?

 

[scootergmc]

Do you not have one at all, or does yours need rebuilt, or a broken plunger?

 

[ljm]

(quoted from post at 11:05:43 01/15/23)
Do you not have one at all, or does yours need rebuilt, or a broken plunger?

I have one. The previous owner tried to start the tractor after it sat for a few years. I have yet to remove the hydraulic head but based on what I have done and found tinkering with it. My assumption is that the plunger is broken.

I would be interested in an entire pump or a complete hydraulic head that would work on it.

 

[scootergmc]

I would just remove the head and see what you're dealing with. On the off chance it isn't broken, Dieseltech here on the boards is very helpful and rebuild prices are very reasonable. Plungers are hen's teeth these days but they can be found.

 

[SPMN]

What make pump does it have? I have a rebuilt American Bosch pump
off of a Oliver Super 55 or early 550 if that would work. Thanks,
Kent Gordon, 903 729 8349 or [email protected]