Combining soys with corn head?

I was out on a drive today and saw a john deere, old combine, with a corn head running wide row beans. How is that done? I thought a corn head was for corn stalks, not beans. Everyone else I know runs beans with a small grain head.
 
Jon Deere used to make a row crop head for soybeans that looked very similar to a corn head. Some people still like them they say you can go a lot faster if the beans aren"t down. Lee
 
A row crop head I presume...
We use them on choppers in corn but I've noticed that it'll pick up just about anything that's standing.
The chopper heads get over-run at no more than 5 mph tho.

Rod
 
The bean head you saw works great once you have the field opened up. CAN'T go across the rows or even at an angle.
The head looks like a corn head with "snouts" that will pick up bean plants to some extent. There are 2 "belts", one on each side of the row. They went alongside the bean stem to hold it upright and there was a disc at the bottom where the plant first was grabbed by the belts. This disc had about 6 sickle sections and rotated very quickly to cut the bean off. The belts then transported the bean stalk to the back of the head where the bean was taken to the center of the head by the cross auger.
The theroy was that the belts held the plant while it was cut off and you had almost no shatter. The speed of the belts and the cutters were controled by the same hyd. that would run a reel, so it could be speeded up or slowed down to match the ground speed. OH YEAH, they are fast, but you need a reel head to open the fields and it is tough to use on curves.
 
The row crop head worked for several crops, but was kinda expensive & got obsolete when we went to all different row sizes, esp with soybeans. Guess they worked well tho. Look like a mini corn head, they feed the row into a knife that cuts the plant off & feeds it all into the combine.

They still make parts, but I think they are no longer making the headers for some time?

--->Paul
 
Thanks, that explains what I saw, never saw anything like it before, and going 55mph on by, it looked like a corn head, but apparently it isn't. Interesting.
 
Hi, Jim. They were popular in areas that grow milo also. Run them just below the heads, and you don't loose the heads, belts hold them in. Might work on sunflowers if they are standing, not sure. Got a couple guys still use them around here. Chris
 
We still use them on corn, you have to go slower, then we bale up the stalks, use to run a lot of sunflowers with them, and we used them on beans too. We run a regular corn head if there is snow on the ground. Didnt know they worked on self propel silage cutters, guess theres no reason they wouldn't. I think in the mid eighties JD actually made a 12 row version for the 8820, i think it got too wide though to work well in beans, and by then the flex heads were improved enough to reduce shattering and header loss it kind of slowed demeand for the all crops.
plainsman1134.jpg

plainsman1137.jpg
 
JD row crop header had interlapping wavey belts on chains to grab the crop and pull it in for less loss. Header and snouts have a a lower profile than older style corn headers. We used them for years here for milo that was going down from weather and winds. If that snow comes soon many may wish they still had one. The new machines got too big for those headers needing to stay full to thresh well and everyone wants to go faster whether they lose half the crop or not.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top