Control lever

[james stockton]

I have a TO 20 and I just broke the control lever for the rear hydraulics.can anyone help me find one.I have vise grips on it now and thats not working to good

 

[Jerry/MT]

Have you tried the parts folks on this forum. You might also try Wenger"s or some of the salvage yards.

 

[chuck41]

James, Did you try a dealer? Any equip dealer can
order one from "The Depot" in Chilton,Wi. The p/n
for the lever assy is 180885M91. You may need the
fabric disc? that is 180889m1. The Depot is
1-800-743-3768 or www.depotparts.com but an imp
dealer must order. Are you sure it is the lever
that is broke or could be the plate? Chuck

 

[Jeff-oh]

James,

I should be able to help you out. Please e-mail

Also we should examine why your lever broke. Does the quadrant control rotate freely, or is it stiff?

 

[John (UK)]

The lever is available from this site, look under parts on the left side of this screen and you can also get it from a Sparex dealer as part S66598 or an MF dealer as 180887V1, this is on the vintage parts listing. If you need the friction disc, that is also available from this site and from Sparex as S60635 or an MF dealer as 180889V1....John

 

[pojo]

Look in the Ford 8n-9n-2n parts on this site. Not listed under the HF parts.