control valve housing

MaryRoby

New User
I need a power steering valve control housing for a ford 7600 2 openings are 9/16 inch on 1 side and the other side is 1/2 inch can anyone
help . thanks
 
Is it the standard ag chassis 7600 or the early row crop 7600 that later became the 7700?

The true 7600 ag chassis model had the integral steering cylinder and control valve inside the steering column with the steering arm and linkage on the left side of the tractor. There was no separate control valve housing.

The early 7600 row crop, referred to in the parts site as the 7600C, didn't really have a control valve either, it had a "steering motor" in the steering column that some folks refer to as a control valve.
 
We dont have a part number I was just hoping someone would have one lying around around that is identical I can get picts if needed, pay
special attention to the fittings ,two are 9/16 and 1 is 1/2. thanks
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top