cub plow dog bone

[phillip t]

Hey guys , does anyone on here know how long the dog bone for the cub plow is ? I have everything but that so i thought i would just make one. Thanks, Phil.

 

[Janicholson]

No idea what you mean!! Jim

 

[tn terry t]

Hey guys , does anyone on here know how long the dog bone for the cub plow is ? I have everything but that so i thought i would just make one. Thanks, Phil.

part from the lever to the draw bar is commonly called the dog bone unfortunately i do not know the measurement little update going back thru some reading im finding its 9 3/4 in long by 1 1/4 wide

 

[Pembroke]

does it tilt the front of plow up or down?

 

[tn terry t]

does it tilt the front of plow up or down?

yes sir it tilts the whole drawbar up and down. that sets the pitch of the plowpoint to the ground

 

[phillip t]

Thanks , Thats what i needed to know.

 

[Jim Becker]

I think you can find all the required dimensions going through this thread:

depth lever - Farmall Cub

 

[phillip t]

Thanks Jim, You have come through again. Phil

 

[gene bender]

Hey guys , does anyone on here know how long the dog bone for the cub plow is ? I have everything but that so i thought i would just make one. Thanks, Phil.

 

[gene bender]

just enough threads to work on the drawbar 2in of threads would be plenty just weld a piece of flatbar with the hole to fit the lever to the threads easy to make if you need exact measurements i can go and measure down at the shop where its cold

 

[gene bender]

does it tilt the front of plow up or down?

 

[gene bender]

does it tilt the front of plow up or down?

 

[gene bender]

does it tilt the front of plow up or down?

 

[phillip t]

just enough threads to work on the drawbar 2in of threads would be plenty just weld a piece of flatbar with the hole to fit the lever to the threads easy to make if you need exact measurements i can go and measure down at the shop where its cold

No need Gene. Thanks anyway . I got what i needed. Thanks a lot , Phil.