culti packer

[Standing Elk]

I am building a field packer to use when I seed grass. It will be 12" wide using one 6" roller in front and two 5" rollers in the rear. With the overlap it will be about 12'. What I am having some trouble with is how the best way would be to connect the two rear rollers to the front one to allow for turns on the corners. I have a couple ideas but would like to see how a factory made one was done. Can any of you fellas e-mail me a couple pictures of the set up on your culti packer? Any help would be apreciated greatly. Thanks Steve
[email protected]

 

[Ken Sweet]

The factory ones always had a wings running out on each end with a hook place on the end of the angle or channel iron for full width work and another hook place back toward the center section for a double roller effect. Ken Sweet

 

[Tim(nj)]

This is one way it was done . . .
To go wider, Mr. Sweet is correct, there were frame extensions to move the hitch points farther out.
One for sale in YT classifieds