Cultipacker

Pete7

Member
I posted the other day about a cultipacker I bought for $50 and I was asking how they come apart.
Just wanted to let you know that I got it apart and home today without any trouble. Appreciate the help and advice you guys gave me. Boy, am I happy with this deal!
Pete
 
Hi Jim...It had end caps held on with 2 bolts each and then a cotter pin thru the axle. Made by McCormick. Grease was still fresh inside it,wood bearings look fine, last owner must have taken care of it!
Pete
 
How wide is it? My neighbor had a single roller/mulcher only 5ft wide and he got $100 for it. I have a 7ft roller with spring tooth inbetween then another set of rollers. Basically a small cultimulcher. I've heard some people are giving up to $500 for ones like mine! Sounds like you got a good buy!
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top