Cummins engine rebuild

SVcummins

Well-known Member
Is finally making some headway.

cvphoto110021.jpg


cvphoto110022.jpg


cvphoto110023.jpg


cvphoto110024.jpg


cvphoto110025.jpg
 
The original was a 53 block and it cracked it didnt have only
about 200,000 miles on it there are 5 53 blocks right in this
area that are cracked . I traded for a replacement block it was
actually another 53 out of an automatic truck that had 650,000
miles on it that hadnt cracked but I didnt want to chance
reusing that block . I have another 1998 3500 with a 24 valve
thats a 53 block with over 340,000 miles and no cracks .
Crummins got away with a pretty good trick on that 53 block
deal . I had actually repaired the crack but then as luck would
have it I lost an oil cooler and filled the crankcase with
antifreeze and lost a rod bearing. When I drained the oil 2
gallon of antifreeze came Out that was clean you could of
reused it
 
Is this the engine that has the killer dowel pin that wiggles out and trashes the timing gear
Train? Some of the early 5.9 Cummins were known for that problem.
Ranch
 
Weird you would rebuild a motor that will fail. You have posted about a gas Chevy you own that works its butt off for you, why not drop a hemi in that pickup and move in with life with less worries?
 
Owned 7 of these now the killer dowel pin is about as likely to happen as Ed McCann showing up at your door with a check for 1 million dollars . I took the time to tear one apart bigger waste of time than voting in 2020 .
 
I had a one fall out at 200000 miles. I have seen others. It isn't that uncommon. Go by the old adage that if you have never seen it happen it isn't impossible. Me seeing it in my own engine means it is a possibility and a BIG problem.
 
That gas engine doesnt know wjAt work is and at 5 mpg . The cummins get 12.5 at 30,000 gvw down the freeway at 75 the old chevy is a play toy .lost one engine out off all the diesels Ive ever owned .
cvphoto110070.jpg


cvphoto110071.jpg


cvphoto110072.jpg


cvphoto110073.jpg


cvphoto110074.png


cvphoto110075.jpg


cvphoto110076.jpg


cvphoto110077.png
 
Well the front housing on the one has the dowel pin holes that arent drilled all the way through the housing if that finds a way to fall out we are in a lot more trouble than you can imagine . The 92 engine I took apart the dowel pin hole did go all the way though but the end of the hole was smaller than the dowel pin .
 
Shes on strike right now looking for a 20 percent raise before she picks up another broom . They do it on tv and still keep their jobs why cant the maid ?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top