Thanks for the fast response Old Magnet
! One of these days I will figure out how to operate this computer and thank folks for there time to reply.
 


Looking for a front idler, rails if they are better than what I have.
pads if better than mine. would you happen to have pictures of your machine? I may be interested in buying the whole thing?
 
I have a D6 9U. I don't get any fuel press from the transfer pump. I replaced the pump but still not pressure. When I opened the filter housing bleed valve and turned over the engine a lot of fuel came out. I checked the injector pump plungers and rack and freed the ones that were sticking. I bled out the air but it will not start. I does not seem to have a lot of pressure when I take the line off the injectors at the head. I have replaced the fuel filters and the gauge attached to the bottom of the fuel filter housing. The rack moves freely as it should. I have not measured the travel but will but I think it is correct. When I turn over the engine it does not even attempt to start. I'm really stumped so can use any suggestions.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top