Dandl flail mower

[Tgwyn]

I picked up a Dandl flail mower and wanting to see if I can get it fixed up to sell or just scrap it. It was free so not losing out. The biggest thing I'm seeing is there are loops that the blades are supposed to attach to, lots are missing and I can't seem to find them online. Also one of the bearings for the roller is trashed, I assume it would be a generic bearing/housing assembly that I could get at a hardware store. What would it be worth in usable condition, I think its 8 or 9 feet long, haven't measured yet.
Pictured are the loops and lack thereof and the bearing.

 

[oldflailmower]

I picked up a Dandl flail mower and wanting to see if I can get it fixed up to sell or just scrap it. It was free so not losing out. The biggest thing I'm seeing is there are loops that the blades are supposed to attach to, lots are missing and I can't seem to find them online. Also one of the bearings for the roller is trashed, I assume it would be a generic bearing/housing assembly that I could get at a hardware store. What would it be worth in usable condition, I think its 8 or 9 feet long, haven't measured yet.
Pictured are the loops and lack thereof and the bearing.

I have EXACTLY the same problems: I have about 90% intact and lacking last dozen or so sets - If you decided not to repair yours, I would be really happy to buy say 30 each sets but especially the hangers and the retainers, or even the blades - [email protected] in Appomattox Virginia. FYI I bought mine at a Virginia surplus auction for $260 dollars and have found no parts available and a previous dandle distributor told me the parts are discontinued and only recourse is to get your local machine shop to make them from scratch. I'd much rather buy them from you because I plan to fab them myself, but that is time consuming. [email protected] Appomattox Virginia.


Having been reading a little I have seen it said the gearbox is same as many ford models and I'm sure you are correct about the bearings...

 

[paul]

Wow that looks like a lot of little parts held on with a cotter pin in a very harsh environment. Surprised you have that many left!

Sorry I’m not more help, just had not seen such a design before.

Paul

Edit:

This thread on another site (I hope it posts, sometimes competition web sites are blocked) is a decade old, but has an informative update from 2022.

Flail Mower - Thanks Leonz - Flail Mower DANDL

Jwedd and Ink, thanks for the info, funny thing is that I'm doing just the opposite, switching back to the scoop blades because my field is not that thick, just ordered the standard scoop knives from flail-master should be here next week. The y-knives left a lot of fox tails so I need a closer...

www.tractorbynet.com