DB Hydraulic Problem

We have a 1967 990 Selectamatic with a puzzling hydraulic problem. It seems to have pressure on the oil return side of the system. The lift arms raise anytime the engine is started and I have to stand on the arms to get them down to hitch up. The loader cylinders will occasionally extend if the loader arms are off the tractor and the loader valve is in float position (I remove the arms during field season to spare the front wheel bearings.) My son was scraping the cow yard last winter and realized that he could make the scraper drop at normal speed by moving the remote cylinder lever despite having nohing hooked to it. I assume he is forcing the relief valve to open and relieve the pressure. Does anyone have any ideas why this is happening? Many Thanks Robert
 
The control valve in the valve chest is probably sticking.Best to remove the plate on the r/h rear of the tractor (4 philips head screws) & see if there is a lot of oil sloshing around in there. It should'nt be!. If it is then remove the dump valve and the control valve. Clean with very fine wet & dry paper & re-fit. If the oil is not sloshing around then look towards the hyd selector valve
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top