Dearborn loader seals

[13fx]

I blew out a scraper seal on a Dearborn loader model 19-42 with a 19-43 da bucket tilt. Hit up a few local spots and the Internet without any luck so far and am hoping someone knows if/where I can get a new seal.
Thanks Steven

 

[Jim.ME]

Try calling Baum Hydraulics.

 

[wore out]

I blew out a scraper seal on a Dearborn loader model 19-42 with a 19-43 da bucket tilt. Hit up a few local spots and the Internet without any luck so far and am hoping someone knows if/where I can get a new seal.
Thanks Steven

Baum should be able to fix you up even if they don't have info on file on that exact machine they can go by description and dimensions.

Below is a link to the FIAT parts site showing what MAY be the cylinder you are dealing with, click on the printer icon and it will download as a .pdf document that will give a more clear view of the parts breakdown, dunno what may or may not be still available there ,but at least you'll have some part numbers.

https://www.mycnhstore.com/us/en/ne...56875BD6/30F0724F-E6BE-E111-9FCE-005056875BD6

 

[13fx]

Baum should be able to fix you up even if they don't have info on file on that exact machine they can go by description and dimensions.

Below is a link to the FIAT parts site showing what MAY be the cylinder you are dealing with, click on the printer icon and it will download as a .pdf document that will give a more clear view of the parts breakdown, dunno what may or may not be still available there ,but at least you'll have some part numbers.

I'm not seeing a link on my end. Worst case scenario I'll call baum on Monday though.

 

[marloweg]

baum 800-228-9222

 

[13fx]

I'm not seeing a link on my end. Worst case scenario I'll call baum on Monday though.

So this time when I logged on the link was there. Thanks I was able to find the seals with the parts number from eBay and have 2 on the way. I may as well replace the second one while it's still available.

 

[Sberry]

Are those the loaders on Ford tractors?

 

[Sberry]

I worked on one recently, all the parts rather proprietary. Henry had them make the cyl rods their own size.

 

[wore out]

I worked on one recently, all the parts rather proprietary. Henry had them make the cyl rods their own size.

So, what size WERE the rods, metric? Did you measure?

 

[Sberry]

I glanced and thought they were 1.25 and laid them on the bench at the hyd store. Guy looks and says, I don't think so. They were over 1.35 or so as I recall. He just said , sol. I am never sure how he makes money but looks busy. Maybe he figured me for a pain. Not sure but I just tossed them as they had damaged rods and had to move/add ear to use modern cyls.
It's not mine.

 

[Sberry]