Dearborn loader

Bob-O

New User
i have a 63 FSM and have been trying to find a loader for it for
some time. My son in law calls and says he's found one that will
fit. It is a deerborn model 19-71. The guy selling it says it will
fit right on, something about it mounting to the rear axel (does
that make any sense)? My tractor has auxilary hydrolic hoses
that are under the seat. Will I be able (if this thing fits) tom get
extensions for these outlets and run it off of them? My son in
law says itn has some kind of pump with a hose in and a hose
out mounted on the front cross bar. If all this sounds crazy to
you, it surely does to me. Just needing someone with way more
knowledge than myself to offer an opinion. It also has a bent
shaft on one cylinder that the seller says can be replaced for
around $80-100. He wants $300 for it but it's around a 300
mile round trip. Anyones 2 cents will be much appreciated.
Bob-o
 
It has a front mounted pump which is not unusual for one of these tractors, but you want to be sure that you have all the parts that connect the pump to the front pulley of the tractor. :wink: Have a Fordsonful Day. :D Dandy Dave!
 
DD, thanks for the reply. Won't the pump work off of the aux hoses
locsted under the seat? If not , what parts are needed to atatch to
the front pulley and isn't that behind the grill and radiator/ Will this
be too much hassle to mess with rather than try to keep searching
for one that just simply fits this tractor? Bob
 
Bob-O
A front mounted pump is preferred, as it is much faster; and leaves your other hydraulics free for other use.
Sorry, I can't help you with what needs to be there!
Unless it has a lot of welding, or is in poor shape, buy it!
If the person who took it off is there, he should know if all the parts are there
Brian
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top