Drawbar bracket

[Kirk-NJ]

Is the drawbar bracket, the four hole bolts bracket, under neath the tractor the same as the ford 8n drawbar bracket

 

[pomester]

Is the drawbar bracket, the four hole bolts bracket, under neath the tractor the same as the ford 8n drawbar bracket

For the 'horseshoe drawbar'? No. The 8N bracket will bolt up, but will not work correctly with the horseshoe. For a '600 series' style (bracket hangs off the PTO area with a separate 4 bolt bracket underneath the case), yes the Ford brackets will bolt right up.

 

[Tom H.]

)

Is the drawbar bracket, the four hole bolts bracket, under neath the tractor the same as the ford 8n drawbar bracket

Hi, I have a TO35 that has the same setup your looking for. It has the mount that bolts up underneath and has another bracket that mounts around the PTP output. I wish I knew where to find a picture of it to post. I think the assembly can be found on the parts site here. Tom

 

[Tom H.]

Look at the Steiner tractor site

 

[Duner Wi]

Ebay has photos . Look at eBay ads. 8N and TO 20 appear to be the same.

 

[jvin248]

.

You can sort the parts lists on yesterday's tractors by model and what is there should fit.

.

 

[Tom H.]

For the 'horseshoe drawbar'? No. The 8N bracket will bolt up, but will not work correctly with the horseshoe. For a '600 series' style (bracket hangs off the PTO area with a separate 4 bolt bracket underneath the case), yes the Ford brackets will bolt right up.

Try this link for parts on this site. https://www.yesterdaystractors.com/Massey-Ferguson-35_Drawbar-Kit-Swinging_49A34R.html

 

[pomester]

Is the drawbar bracket, the four hole bolts bracket, under neath the tractor the same as the ford 8n drawbar bracket

I finally remembered to take a couple of photos. Here's an aftermarket hitch on a TO-30.

The aftermarket kits come with a 1" thick drawbar, I have an original Ford unit that's 1-1/8" thick. It fits and is better/heavier duty.

 

[TheOldHokie]

Look at the Steiner tractor site

Kit part number is SDA6

TOH

 

[Ray,IN]

I finally remembered to take a couple of photos. Here's an aftermarket hitch on a TO-30.

The aftermarket kits come with a 1" thick drawbar, I have an original Ford unit that's 1-1/8" thick. It fits and is better/heavier duty.

View attachment 134315

View attachment 134316

First pictures I've seen of a red HF TO series.

 

[pomester]

First pictures I've seen of a red HF TO series.

Ya - a bit of an identity crisis. It's painted like a Ford. It came to me that way.