Duals

[Centre county red neck]

Hello, I am looking for 9 bolt dual hub extensions for my 1466. I would like a 5 inch extension or less. Anyone know where I can find a good used set?

 

[Mule Meat]

Just throwing it out there in case you didn't know. May help in your search.

1086; 1456; 1466; 1486; 4568; 4586 all have 3 1/2" axles.

 

[Centre county red neck]

thank you, I have the 3.5 in hubs on, I am looking for a short extension to bolt onto the hub to set the outside duals a little farther away from the inside tire.

 

[BarnyardEngineering]

You can post a wanted ad in the Marketplace above. I don't know of a reliable source for such a thing. 9 bolt stuff is obsolete in the new market. You're going to have to find them in the wild, at auctions, on Marketplace or Craigslist, Tractorhouse... maybe check with the bigger used parts suppliers like ASAP...

A machine shop could build you a set with some rough dimensions.

Looks like you just missed a set on auctiontime that ended December 31st.

 

[super99]

Salvage yards. Try Bates International, Colfax tractor salvage, etc

 

[NY 986]

thank you, I have the 3.5 in hubs on, I am looking for a short extension to bolt onto the hub to set the outside duals a little farther away from the inside tire.

Do you have the IH hubs or aftermarket? Depending on what you have might increase your options. The good news is auction season will be starting soon and you never know what somebody might bring in as a consignment. I've seen extensions but they seem to be very rare.

 

[Centre county red neck]

Do you have the IH hubs or aftermarket? Depending on what you have might increase your options. The good news is auction season will be starting soon and you never know what somebody might bring in as a consignment. I've seen extensions but they seem to be very rare.

They are after market hubs. 2 big u bolts clamp the hub to the axle. I am also watching for a set of wheels with the centers off set to the outside of the rims. The ones I have now are close to centered.

 

[Tx Jim]

They are after market hubs. 2 big u bolts clamp the hub to the axle. I am also watching for a set of wheels with the centers off set to the outside of the rims. The ones I have now are close to centered.

I have a set of 10 bolt hubs & wheels with 20.8X38 tires with 35-40% tread that the wheel centers are offset that were mounted on a IHC1486 for $750 located in N Texas.

 

[BarnyardEngineering]

They are after market hubs. 2 big u bolts clamp the hub to the axle. I am also watching for a set of wheels with the centers off set to the outside of the rims. The ones I have now are close to centered.

Maybe?

https://williamkent.nextlot.com/auctions/1699494/lots/37594845

 

[Mobuck]

M&W made those hub extensions. They're literally 'unobtanium' in my area.