Dynamic load testing of a Massive Ferguson

hummmm? my unprofessional guess would be once the front wheels were off the ground and the back wheels weren't moving forward the engine torque was too much for the bolts holding the engine onto the rest of the unit and they failed.
 
appears to me that the load held tractor in place and the pull of the crane in front clearly jerked the front end off.
 
(quoted from post at 15:38:36 02/03/22) appears to me that the load held tractor in place and the pull of the crane in front clearly jerked the front end off.
ops! my bad, somehow I missed that part with the crane hooked to it. That definitely would be the reason for it.
 
My opinion. Watch closely and you can see the crane operator is winching in very slowly and steadily. Right before the break the front end of the tractor rears up due to engaging the clutch and then it rapidly comes down when the clutch is disengaged. This caused a snap which the bolts/castings could not withstand. This tractor probably would not withstand using a loader abusively either. There are hundreds of YouTube videos of these people totally misusing and destroying tractors. Where are they from? India? Most of the time they appear to be farming barefoot and wearing something that looks like a nightgown. Some of the mentioned videos show stupid tractor stunts with hundreds of people watching like they are at some kind of festival.
 
And a fairly nice Massey 7250 goes to the scrap yard. If they watched youtube videos they'd know to hook to the wagon. I've seen several videos where the front pulled off and the driver was left standing on the ground. Amazing they don't get hurt.
 
(quoted from post at 20:10:52 02/03/22) My opinion. Watch closely and you can see the crane operator is winching in very slowly and steadily. Right before the break the front end of the tractor rears up due to engaging the clutch and then it rapidly comes down when the clutch is disengaged. This caused a snap .

Looks to me the crane via winch WITH snatch block no less pulled tractor apart.
The snatch block and tractor front jumps up and then before it comes down the block and tractor front goes sideways before going to the ground.
 
(quoted from post at 13:46:05 02/03/22)
Well that's not good. What were they thinking??[/quote]

They were thinking "Git R Done!" just like any one of you that brags about putting 32,000lbs of round bales on a gooseneck trailer and pulling it back to the barn with your 3/4 ton pickup.

Whatever country this is, the choice is, make enough money to feed your family for today, or do the job safely. They get paid by weight or volume, so the answer is to haul as much as you possibly can to make the most money in as few trips as possible.
 
Yep could have been around here easily. Homeowner/landowner wants the job done cheap so they hire someone without equipment to get a job done. Homeowner/landowner says its ok use mine. After a few thousand in repairs the homeowner/landowner will still brag about the job and workers. Plenty of my neighbors have that tshirt.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top