Engine knock. solved

On 11/4/21 I requested assistance from the forum with knock in engine after it was rebuilt, engine knock. I found the culprit. The rod on no. 4 was oversized for some reason. I put in another old rod and cap, torque to 40 lb. Noted a slight more effort in rotating the engine with hand crank. Everything was fine. Just shows some of the problems you can encounter with a no history tractor. Apparently face of rod and cap was not honed to specs. Thanks for all replies.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top