F 600 Dump Bed

OK_BobL

Member
Just bought a 1961 F600, with dump bed. The label on the dump cylinder says TRO JAN Truck Lifts, Wichita, KS.

Does anyone know of info/manuals/etc for this lift and bed? I think 13 foot bed. Working fine right now. Found the F600 1961-2-3 shop manuals on cd-rom and have ordered a ford owners manual. Just trying to gather info now as I will be working the truck and have to keep it running. It has a 292 cuin engine in it.

Thanks Bob L
 
bob i didnt get anything looking for tro jan, although ive heard of the name before, shouldnt really need a manuel for a dump body though, it will be made up of generic parts, the ram can be serviced at any hydraulic shop that repairs hydraulic cylinders, the pins, hinges, ect can be made out of demensional steel, by a competent welding or fabrication shop or a real good welder at a gravel pit, construction yard ect, the pto on the transmission will be a common brand and hardly ever give any trouble, if yours has a driveshaft in the system, the u-joints and yolks ect are available at carquest or napa, and are also common stuff, [ bring your old parts in with you, there is more than 1 size]
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top