F.E.L. make?

[Jim L WA]

I asked this on the implement ally forum, but only got one iffy response. I know there are a lot of knowledgeable people on here, so I'll try. Can anyone identify the make of this loader? It's mounted on a Ferguson TO-20. I also asked on the Ferguson site, but got zero.

Under that blue paint seems to be a light green or yellow/green color.

 

[robilmichael]

This looks like, but not quite, a Schwartz 1200 loader. They made loaders for many manufacturers and the 1200 was akin to the Ford 770 loader. About the same size, but not quite, and the brackets would be different for each tractor. This is a 1200 on a Massey 135.

 

[robilmichael]

The more that I look at your loader, it does not appear to have down pressure and the brackets are very different from a typical Schwartz unit. It may be a Schwartz loader, but if it is, it is a very early unit. Good luck.

 

[Sean in PA]

(quoted from post at 15:03:48 08/21/19) The more that I look at your loader, it does not appear to have down pressure and the brackets are very different from a typical Schwartz unit. It may be a Schwartz loader, but if it is, it is a very early unit. Good luck.

Looks like it has down pressure to me. The first picture shows 2 lines going to fittings at both ends of the lift cylinder body.