Farmall 350

jlee1967

New User
Wife just bought the tractor i have been drooling over for two years. Farmall 350. The serial number is warn pretty bad but i can see 1230 then over to the right of that number is the letter L then below that is the letters CS. i think its a 1957 but not for sure. Has wide front and factory propane. Paint is decent no rust. Sheet metal is straight. Runs great! Just barely touch the starter and its running. Torque amplifier works perfect. I plan on using it to work my garden and water melons come spring but also am going to fix the little odds and ends. Any help with identifying the year would be great. Also it is row crop not standard.

This post was edited by jlee1967 on 12/14/2021 at 09:59 am.
 
Merry Christmas to you, tractor would not fit under the tree so you got it early. You must have been nice this past year.
Better not be naughty because you'll be wanting something to go with or for your tractor in 2022. gobble
 
Congratulations! Would love to see some pictures of it when your
able to post them. I dont know if the tractor will be a keeper, but any
wife that buys you one for Christmas certainly is!
 
(quoted from post at 14:29:46 12/14/21) Thank you for the help. I have waited so long for this tractor and she surprised me with it.

You've got a good wife there! Take good care of her!
After you've posted a few more times you will be able to upload photos. We can't wait to see them.
 
IH 350's were great tractors. I grew up when we had two 350 utility tractors bought new about 1957 or 1958. They may have even had consecutive serial numbers, I can't remember. My uncle
worked as a salesman for Roberson's (IH dealer) in Freehold, New Jersey. IH was very strong in New Jersey at that time. The 350's were very strong tractors for their weight and size. We
never had any problems with them. The potato guys over in Mercer County and adjacent areas liked Oliver tractors, I think for their good cultivators and dealers.
 
L was for LP, C=LP gas standard altitude. S= T/A with provision for IPTO, most also have the PTO. Yes early 57. Sounds like a good one.
 
We have a 300U. I am not a big fan of the way they are engineered as everything seems to be in the
way of something else. I had to the replace the fan belt and it literally took 8 hours. Of course the loader
and front mounted pump were half the effort. But having the loader is handy. Is a 350 similar? I assume.
cvphoto110799.jpg
 
We also had a Farmall 350 on the farm in KS where I
grew up. My uncle still has it but currently the engine
is rusted tight. The engine was wore out and they quit
using it and left it set outside and it suffered from the
water down the exhaust syndrome. I was involved with
creating 1000s of wire tied bales with it and a 47 baler.
Either driving it when younger and then later packing
them on the hay rack behind the rig. My uncle talks
about getting it in the shop and pulling the motor out
for a rebuild, but the old 300 even though it is getting
wore out as well just keeps going. He is in his 70s and
urgencies have to be quite immediate for him to act. I
did help him move it under a lean to of his barn so it is
out of the weather anyway. In case you want to take a
closer look at the make up of your tractor I am
attaching a link to the CNHI online parts book for your
350. This updated layout has nearly been out a couple
years now. It is not quite as good as the site it replaced
in several ways. You used to be able to cue up several
different models and switch between parts diagrams
for them easily. This layout is a one at a time deal. I
suppose if you create an account, maybe the tractors
and serial numbers you have can be entered and then
you could move between different models more easily.
Just a note if you choose to view it on a phone there
may be more pages of subsections as is the case for
the ..Chassis.. section. Clicking the arrow next to the
black square at the bottom will take you to it if more
are available, the number of available pages are shown
on a PC but not on a phone. If you navigate to a page
that will not allow you to go back, you can simply click
..Model.. as the search type, then type in ..Farmall
350.. search and your tractor will appear in the list to
choose.
CNHI Farmall 350 parts diagrams
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top