Farmall 400 Engine Rebuild Question

bmbaldwin

New User
We are rebuilding a Farmall 400 engine and learning as we go. We were told that 1 in 20 Farmall 400 heads are cracked. Has anyone else heard
this? We were going to take the head to a machine shop to be cleaned and have the valves removed, but is it worth it? We already pulled the
pistons and need to find a sleeve puller that works for the 4 and 1/8 inch sleeves (inner diameter).
 
Not sure about the gas but could believe that of the Diesel. Of the 6 that I have owned, gas I have had none had cracked heads but each Diesel did.
 
My response is yes. If you are that far into a rebuild, then another couple hundred shouldn't matter. Have it all checked again.

You never know who or why the engine was repaired years ago.

Beagle
 
Yes, do take it to the machine shop, have them check it out, specify you want it checked for cracks.

If good, check everything else, do what it needs.

Get a quote if you like, but best just let them do what it needs, otherwise their hands are tied, they can't do a quality job having to do shortcuts.

If it is a reputable shop they will be honest with you.

I trust you have a shop manual to reference. It will pay for itself many times over in mistakes not made!

If this is a diesel do not take shortcuts!!! They are unforgiving money devouring monsters! Do it once, do it right, or else...
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top