Farmall H loader

[JarettB]

I found a loader for sell to go with my Farmall H. What do you need to have before you get the loader? Or should everything come with the loader? I'm a newbie to loaders if you haven't already saw lol. Thanks

 

[DeltaRed]

Kinda hard to say.Need to know what loader.Valves if
they are not on loader.Or it could use the valve on
the tractor.It may or may not have a pump,or coulds
use the tractor pump.Lots of possibilitys,too many
to say here.We need more info.

 

[JarettB]

(quoted from post at 21:25:31 01/09/14) Kinda hard to say.Need to know what loader.Valves if
they are not on loader.Or it could use the valve on
the tractor.It may or may not have a pump,or coulds
use the tractor pump.Lots of possibilitys,too many
to say here.We need more info.

Well I think it is a #30 loader maybe? But what I'm trying to say is what do you use to lower and raise the loader?

 

[JarettB]

and it also has hoses that go to the tractor if that helps?

 

[DeltaRed]

If the loader does not have a valve,then you use the
belly pump valve.If that wont handle the job,then
you gotta install a valve.Do you have apump?

 

[DeltaRed]

Jarret,we need to see some pics.Find a local guy to
look at the thing and help you get lined out.Like I
said, there are too many variables/possibilitys to
say anything definite here.

 

[JarettB]

I have a belly pump on my H. The problem is I don't have the loader yet and all I've seen is pictures of it. The seller says it came off a super H, would that fit on my H?

 

[JarettB]

okay ill do some more research and stuff. Thanks for helping

 

[DeltaRed]

If it came from an H,then it will bolt right up to a
SH.If you were given the appropriate/accompanying
'hardware'(pumps/valveing....) you should not have
any problems.

 

[JarettB]

(quoted from post at 22:05:48 01/09/14) If it came from an H,then it will bolt right up to a
SH.If you were given the appropriate/accompanying
'hardware'(pumps/valveing....) you should not have
any problems.

okay thanks. The owner said it had everything on it and it worked properly so i guess I'll find out sooner or later! Thank you

 

[john *.?-!.* cub owner]

here is a link for the model 30 Loader. We had one on our H and they are heavy. The same loader also fit an M just by reversing the mounting plates.
http://home.centurytel.net/ejpuckett/Manuals/30%20loader/