Farmall H

[Jarett Brewster]

I'm missing some bolts on the frame of my farmall h. They are at the very front of the tractor along the frame rail. There's two bolts that go on both sides. What I want to know is what size are the bolts? I seen that they could be 5/8 x 1 hex but I'm not for sure. Thanks

 

[jasinpa]

i think your right on the 5/8 thread i know there couse i think 11 pitch , not sure of lenth without taking one out of my tractor but you want them as long as they can be without bottoming out , i use split washers on mine too, i think 1 1/4 long , but just measure how much depth you have to work with and go from there , i an assuming the bolts your referring to there are 4 on each side in the front of frame rail the middle one between them 4 was used for mounting equipment & so was the very front

 

[Jarett Brewster]

Thanks a lot! Ill measure the length and everything and see what I can come up with. Much appreciated!

 

[Jarett Brewster]

I think it's 5/8-11 x 1 hex bolt. Maybe 1 1/4 like you said. Might just try both and see what will work

 

[Janicholson]

Chase the threads before putting the new bolts in the holes. Jim