Farmall H ?

[RAL]

Is it possible to take the rear clamps and rims off of a farmall 300 and bolt the 300 clamps and rims on a farmall H hub? The H has the the stock cast 6 spoke hubs and the 300 has the stock cast 8 spoke hubs with the flat style rims. Thank you.

 

[Puller504]

Trading sideways? I"m curious as to why you"d want to do that? Usual move is to switch from cast wheels to bolt-on hubs with pressed steel wheels for weight saving. If rust is the problem, switch outer rims. Don

 

[followersofweber]

STROKE IT

 

[D Slater]

If you plan on using the 8 spoke wheels from a 300 with 2-1/2 diameter axle along with rims they will work. If you want to use the double bevel rims and rim clamps on the H wheel, no. H wheel rim clamp bolts are around a half inch closer to center of wheel than 8 spoke wheels. Also clamps won't work right on edge of H wheel and only one lug to keep rim from sliping on wheel would come close to line up.

 

[RAL]

We can not run 9 bolt cause we have to run our original cast hubs to pull in our antique class. Reason I want to run the 300 rim is we have a few sets with tires on them and we do not even have one set of h rims. I guess I was trying to save some money.

 

[RAL]

Thank you