John69

Member
I have a friend who had to buy a new distributor for his Farmall H. He can't seem to get it in time cause it won't start. Sometimes it acts like it want's to start, but it won't. Hows the best way for him to get it back in time?
 
Remove No1 spakplug near rhe radiator and bring that piston to TDC on the compression stroke. Hold your thumb over the plug hole while a helper hand cranks the engine until you feel compression against your thumb. Take a LARGE handle screwdriver & drop it on top of the piston & have the helper to keep slowly cranking the engine while you watch the screwdriver rise. When it quits rising your timing marks should be aligned
& both valves should be closed on that cylinder.

Remove distributor cap & see where the rotor is pointing. Should be at the No1 plug tower which is around 2 o'clock. If it's off you need to pull the distributor off the engine & turn the rotor to the No1 plug tower & reinstall it. Your firing order is like this on the cap as it rotates CW: Hal
2-1
4-3
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top