Farmalll 200 Front casting

[Bohemian32]

I am in need of a front casting for a Farmall 200 or Super C serial number 128315 or above.
I bought a 200 and the front casing had been broken off and re welded. Would like to replace with a good one as the welding is not holding.
Anybody have some ideas as to who to contact or where to look.
Thank you.

 

[fastfarmall]

Have you tried the wrecking yards, there a pretty good chain of yards, One is in Worthington Minnesota, Google it!

 

[used red MN]

The CNHI online parts does not give you the part number.
Here is a link to an alternate site that gives the number,
351120R71. Web search that and some will show up. Might
add a reply with your location, if someone here has one to
offer. Beware of the adds on that linked site. Might try to
call All States Ag Parts the YT parent company see if they
have one from salvage and if it is close to you.
Poke here

 

[Bohemian32]

Sorry I forgot to tell where I am from,
North Central Iowa right in the middle of the state 43 miles south of the MN border
I will try those suggestions tomorrow,
Thank you to those that did responded. Especially the part number.

 

[used red MN]

If that is where you are I would suggest Wall Lake Salvage,
800-522-1909 and see link. Worthington is not far from you
either.
Poke here

 

[bvfarmall]

Have one from a Farmall C should work, located in west central MN in Chokio, MN please e-mail bvfarmall@gmail,com

 

[Bohemian32]

I found one at Ag Parts, called and with the help of the part number they had one and going to ship is to me next week.
Thank you to everyone that responded to my question.

 

[Bohemian32]

I found one at Ag Parts, called and with the help of the part number they had one and going to ship is to me next week.
Thank you to everyone that responded to my question.

 

[used red MN]

You are quite welcome! Glad you got it worked out.