Ferguson TO30

[Jmiller531]

Runs for 5 mins then starts to sputter then stalls out. Drained all the old fuel And cleaned sediment bowl then put fresh gas in. But still the same issue.

 

[ptfarmer]

(quoted from post at 15:45:40 04/16/20) Runs for 5 mins then starts to sputter then stalls out. Drained all the old fuel And cleaned sediment bowl then put fresh gas in. But still the same issue.

The 90 degree elbow that screws into the carburetor has a screen on it, remove that elbow, and make sure that screen is clean!

 

[Phil Tibbetts]

Does the coil get hot?

 

[Jmiller531]

Ok thankyou I'll give that a try

 

[Jmiller531]

(quoted from post at 16:47:03 04/16/20)

(quoted from post at 15:45:40 04/16/20) Runs for 5 mins then starts to sputter then stalls out. Drained all the old fuel And cleaned sediment bowl then put fresh gas in. But still the same issue.

The 90 degree elbow that screws into the carburetor has a screen on it, remove that elbow, and make sure that screen is clean!

ok thanks I'll give that a try

 

[Jmiller531]

(quoted from post at 18:27:48 04/16/20) Does the coil get hot?

I'm not sure I'll be working on it again tomorrow and I will take a look at it