fittings for davis industries loader model 100

[paul2155]

Threaded fittings for hydraulic supply(s) to front bucket tilt piston and bucket lift pistons are leaking. Leaks not from hoses or hose connectors to fittings. Seeking info on fittings. Any thing unique about these fitting? Parts typical and available?

Equipment in use: leaks not severe but messy. Seeking to not disassemble/remove fitting {in order to size replacements) prior to guidance. Please advise. Thank you

 

[TheOldHokie]

(quoted from post at 16:38:00 08/16/21) Threaded fittings for hydraulic supply(s) to front bucket tilt piston and bucket lift pistons are leaking. Leaks not from hoses or hose connectors to fittings. Seeking info on fittings. Any thing unique about these fitting? Parts typical and available?

Equipment in use: leaks not severe but messy. Seeking to not disassemble/remove fitting {in order to size replacements) prior to guidance. Please advise. Thank you

You will need to take it apart to identify the type and size of the fittings. They will be standard parts. No way to reliably know what is currently on a loader of that age.

Dan