Fixing a tractor

Ultradog MN

Well-known Member
Location
Twin Cities
Used to be there were more posts about fixing tractors here.
Remember Alan NE? He was always working on something and posted good photos to go along with the job.
ACG was another guy I liked to watch what he built.
Sometimes I wonder if we just come here to argue so I thought I would make a post about fixing a tractor for a change.
I woke up thinking about doing these handles this morning.
This Ford dual remote valve had very poor handles on it. The lower one was broken and the upper one was just a piece of flat bar that someone had crudely added.
Replacement handles for these are made of unobtainium.

cvphoto128017.jpg


I had saved this handle from a different valve for years. Obviously it wouldn't work but the pivot did fit on this valve.

cvphoto128018.jpg


So I chopped it apart, brazed in a piece of steel and made a handle to fit.
I also repaired the lower handle so it is good again.
It ain't so pretty but it is once again, suitable for everyday use.

cvphoto128062.jpg


Anyway, this is what I did this morning and it wasn't intended to start an argument. Though you're all entitled to argue about it if you wish.
Jerry
 
Good looking repair.
One of these days I will try to learn brazing again.
Learned it in high school but was not very good with it.

I recently rebuild the engine in my 43 Farmall H but did not take any pictures. I was 3 projects deep at the same time.
 
Good Job!! Sometimes one will do a 'hack job' in the heat of battle just to get done. We intend to fix it right when we have the time. Often, the time never comes.....We've all been there.
 
I enjoy reading the posts about fixing or making things but Im usually occupied enough with what Im doing that I forget to take pictures along the way or else I take pictures but my computer is slow loading them I get tired of waiting for them to load. I guess I need to get a camera again and quit using the phone camera. Chris
 
Nice job. I never was good at brazing either. Our teacher in Vo Ag taught us the fundamentals. Made us all try to do it, and then moved on to something else rather quickly. Probably the only thing in Vo Ag that I failed at, along with most in my class. I was kind of glad we moved on to something else, because I was not doing well at it.

I try not to post anything very far off topic. But find myself replying a lot of times, to stuff that is. Probably due to the bulk of it on here.

I think the internet in general (not just this site), has built walls and barricaded people from thier in person socializing. Kind brought about a collapse of thier old school social world, if you will. So they bring to the table here, what they normally would of talked about at the coffee shop, dance hall, poker night, odd fellows meeting, Sunday school, bingo hall, town hall meeting, or anything else that they NO LONGER go to. Some of which they may of quit going to, because of at home entertainment on the internet. Or some of which don't happen anymore because of people staying home for internet entertainment.

Next time you are out in public (out to eat, ball game, whatever), take notice to how many people got thier nose in thier phone rather than visiting with the person sitting right beside them.

In my opinion, that's how floods of off topic ends up on sites such as this one. This is the outlet for those not talking about it elsewhere.
 
I should take pictures of things so I can remember how I did it 30 years earlier and such. I don't and am not good at putting pictures online. Some because I really don't want the world to know everything I do, and because it gets time consuming to do to many pictures to get across what I'm doing. Besides how many tmes cam you watch somebody fix a light on a tractor or change tires on things. Also I do things some people would consider dangerous with the method I do them and don't need the debate about how I did it. Like the other day I had the loader bucket over top of me while welding a piece on the Rolling harrow well it would have come down on the harrow if it fell and I would probably not got hurt. This was the quickest easiest way to squeeze the crack shut so it was tight in place before welding. All the armchair safety Nazi's would have had a conniption fit about that, and told me so.
 
Thank you. Reminds me, I have to make sure my MM ZA is running for the Trail Days parade in Ipswich SD on Saturday. Going to pull Grandpas MM G144 combine with it. Its a little tricky on some of the narrow streets.
cvphoto128074.jpg

6 of Grandpas grandsons from last year

cvphoto128075.jpg

Im on the tractor my brother is on the combine. The unloading auger is removed because we were about to transport it down the hi-way. We put it on for the parade.
 
Refreshing X 2. I like to see pictures of everyone's home fixes. I have lost track of the fixes I have made that did not hold up and were scrapped. So I will never criticize someone's work just to make it sound like I know something unless it is for some blatant safety feature and that is rare.
 
UDMN. Ya know. You couldnt be more correct and you brought up something that many think about (myself included) but just let ole dogs lie. Thanks for posting a really interesting fabrication. Wingnut
 
I agree. Lots of posts I just skip. Speaking of Alan NE haven't seen any posts by him for a long time. Does anyone know anything about him.
Phil
 
A lot of us old guys just naturally argue about anything, I think. We can argue about that, I guess. I remember when you used to post about your friend Kenny who also had a few old tractors. Is he still around?

Butch
 
A lot of people come and go. I remember Allan NE, Also I haven't seen VC in a while. I like your table is it as thick as it looks? Stan
 
That's so weird! I was just thinking about Allan yesterday. His posts were usually interesting. I lurk a lot here but don't post much. I would like to share more pics of what I do with tractors but it is such a pain to do on this site. And I'm awful with my smart phone.
 
Couldn't get through the post without complainin' about not being able to find parts for a 60 year old hydraulic valve that they made about 50 of, most of which have long since been melted down and turned into Harbor Freight wrenches.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top