Flash Times

[Dan-nyc]

I was wondering if someone could further my understanding of Flash Times. If the spec sheet suggests around 15 minutes. How much leeway is there. Since this is my first time I am sure I won"t be rushing it but How "late" is bad, or how can you tell your too late? Thanks!

 

[SWMO]

Flash Time: The time between paint application and consecutive coats, and/or force dry.

 

[CNKS]

You can recoat when the paint becomes tacky. Depending on the temperature that can be 5-15 minutes for QUALITY paint. If you find a spot you missed when you think you are done, you can apply another coat.

 

[Dan-nyc]

I will be using PPG Omni. So if I take 30 min after starting to lay down the second coat that will be ok or do I need to re-coat right at/around the flash time? Thanks as always everyone"s knowledge is appreciated.

 

[CNKS]

There is no need to wait 30 minutes -- about 10 is ok at normal temperatures. Waiting 30 probably won't hurt anything, but it doesn't help either. Just mix enough paint to put on 3 coats. With Omni that is 3 full coats, you do not need a lighter first coat. Don't be concerned if the first coat does not cover everything, that will be taken care of in the next two coats.

 

[Dan-nyc]

Thanks, Just sweating the details since this is my first time spraying "real" paint.