Float ride set rebuild

[rod in nebraska]

I am going to rebuild a 620 float ride seat, who would you buy the rubber suspension kits from, are there some kits better than others , thanks, rod

 

[JIM MN]

Some parts here on Yesterdays Tractor. Try Martin Parts & Repair, in Indiana, at 844-729-2510. You will need a special too to load the rubber donuts. You may be able to make? Ask about this tool?

 

[620 John]

I got mine from Steiner. I was able to put mine together without the special tool. Don't remember how. I think the 720 service manual talks about. You better be in a good mood when you start the project because you won't be when try and accomplish the project...... An air hammer is your friend for that job.

 

[2cylinder]

Lind brothers always hook me up with good parts. make sure you have the tool or make one for the springs.

 

[old popper]

I recommend Martin's parts & repair in Rochester Indiana, they have a complete rebuild kit. I got the tools to [preload the rubber springs from Sunsdahl's tooling in Fairabault Mn. If you get Green Magazine, both advertise in that mag.

I am going to rebuild a 620 float ride seat, who would you buy the rubber suspension kits from, are there some kits better than others , thanks,

 

[old popper]

Take pictures as you take it apart! I had mine together 4 or 5 times before I got everything together correct.

 

[tomnwoh]

I am going to rebuild a 620 float ride seat, who would you buy the rubber suspension kits from, are there some kits better than others , thanks, rod

Steiner has a video describing the rebuild step by step. Recommend watching it