Floor jack recomendations

My floor jack is leaking pretty bad so it's time to start shopping for a new one. Have a 3/4 ton pickup truck so it will need to be a 3 or 4 ton model. Any suggestions? Thanks
Unless you need to carry the jack from place to place I'm having good luck with a Pittsburg 3 ton jack. It's low profile and has a long handle on it like the tire shops use. I can lift the entire front end of my 3/4 ton van with it.
 
About 50 years ago my brother worked at "the jack factory" in Baraboo, Wisconsin. He said they all were made the same. The paint color and name on the jack was the only difference. I don't recall what brands were included.

Ken
 
I have 4 purchased at HF, 2 regular length and 2 extended length. Have had them for at least 10 years. All 3 ton, no problems with any of them. I have 4 for certain tasks around the farm.
I got out one of the first purchases yesterday that was the short length. It wouldn't stay up. Thought the piston was out of oil so I opened the fill port and it was full. Played with it a little trying to figure out the problem. I finally figured that the handle that closes and opens the hydraulic fluid wasn't closing adequately. Put some oil where that shaft goes into the mechanics of the jack, worked it back and forth a few times. Rolled it over to a good sized load, jacked it up, measured the height. Half an hour later was still there.

Easy fix that probably lots of folks never thought about......I never did but it saved me tossing out a perfectly good jack.
 
I have this Catapillar jack. I like it because it has a flat plate on the bottom and it works on dirt without sinking in.

ZbBx5s2.jpg
 
I have this Catapillar jack. I like it because it has a flat plate on the bottom and it works on dirt without sinking in.

ZbBx5s2.jpg
Looks nice! Not shy about their price though! $431 advertised at Lowes. I like the extension on the saddle. Sadly, made in China, Taiwan or Vietnam by Alltrade or BDK.
 
About 50 years ago my brother worked at "the jack factory" in Baraboo, Wisconsin. He said they all were made the same. The paint color and name on the jack was the only difference. I don't recall what brands were included.

Ken
I'm guessing one of those was Blackhawk, and possibly Monroe.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top