ford 3000 hydraulic

[dennis8n]

drain hyd oil .replace with 134d .now nothing works dont have manul .what i think lost prime late 70s 3000

 

[Larry NCKS]

don't think 3000s were made in the late 70s.

Despite that, find the bleed plug if it has one. Also make sure you've got everything back together properly.

 

[Mike(NEOhio)]

Get a hose adapter with pipe thread to fit the bleed plug and run a hose to the fill hole on the rear axle housing. Just let it idle till the air works out. Could take a while.

 

[dennis8n]

where is bleeding plug

 

[dennis8n]

was told it was from the late 70s ill fine out going to buy a manaul. now just have to fine bleeder plug

 

[Mike(NEOhio)]

It's a pipe plug with a hex socket, on the side of the pump head pointing downward to the left. You have to bend down to see it.