ford 4100??

[Roy in Ga]

I posted looking for info on a 5000 but have found out that it is more likely a 4100 and a England tractor. The #s are some what of a mystery and some what confusing. I can find a breakdown on U.S. built tractors. We ordered a bolster for a 5000 and when it wasn't the same we looked for a picture and found the 4100 has the type bolster we need. I would like to correctly identify this tractor before we try it again.

 

[awhtx]

How many cylinders does the engine have?

 

[Sean in PA]

If the transmission has been swapped, then the numbers on the bell housing won't be correct for the rest of the tractor.

The original numbers might still exist on a label on the under side of the right side of the hood.

What are the numbers stamped on the bell housing aft of the starter, and if the label exists under the hood, what are they?

 

[richardp3]

Pictures would be a great help.

 

[larryd]

A model 4600 that came from the factory with a
3600 front end.
was called 4100 SU you would need the bolster
from the 3600 ,
I may be able to help I have a couple of the bolsters.
I have a 4100 SU
eMail me.