Ford 4400 missing model numbers?

Langr

New User
I'm looking for stampings on the bell housing right behind the starter and below the fuel valve, but I see nothing. The other side of the bell housing has a similar flat feature also with no markings. I do find cast (not stamped) numbers on the lower right side of the engine block, and also on the left side of the gearbox below the seat. Any help on figuring out what I have? Are numbers located elsewhere due to having the front bucket in the way? Thanks for any help!

Right lower engine:
C5NE 6015 C
??270

Left gearbox under seat:
-179 65
C5 NN 4024 H
MH
 
It would not let me add photos, and I suspect the file size was too large. If that will be required to figure this out let me know and I'll mess with it until it works. Thank you
 
Welcome to the Ford Board.
The hand stamped numbers should be there
where you say you were looking. You will
probably need to wire wheel some crud and
or paint off to see them. I think you need
to have about 10 posts in order to add
pictures. It is to prevent spammers who are
just passing through from posting junk.

cvphoto130048.jpg
 
Ok thanks for the response and that photo. That's the spot I was looking, and those stampings look clear as day. I'm pretty confident that mine has none, and it doesn't look like overly thick paint, but I will look again tomorrow and even consider stripping some paint away.
 
You could look on the under side of the right side hood panel, up above the battery to see if the foil sticker is still there and is still legible. If it is then it would have the numbers you are looking for as well.

A Google search does show that C5NE6015C is the engine block casting number for a 3 cylinder 4000 series tractor. The main difference between the 4000 ag chassis model and the 4400 Utility chassis model is the front axle and steering setup. Does the front axle have 2 bolts with nuts through from front to rear on each end of the axle, or is it solid with no bolts and nuts? Post a picture of the front axle between the wheel and the bolster if you are unsure of what I am asking about. Another thing to look for is where the power steering lines go from the power steering pump. If the lines go to a steering cylinder under the nose of the tractor then it is either a 4400 or a 4500. If they go to a cylinder on the left side of the tractor then it is an early 4000 and if they go up to the steering column then it is a later 4000.
 
(quoted from post at 21:26:14 07/09/22) You could look on the under side of the right side hood panel, up above the battery to see if the foil sticker is still there and is still legible. If it is then it would have the numbers you are looking for as well.

A Google search does show that C5NE6015C is the engine block casting number for a 3 cylinder 4000 series tractor. The main difference between the 4000 ag chassis model and the 4400 Utility chassis model is the front axle and steering setup. Does the front axle have 2 bolts with nuts through from front to rear on each end of the axle, or is it solid with no bolts and nuts? Post a picture of the front axle between the wheel and the bolster if you are unsure of what I am asking about. Another thing to look for is where the power steering lines go from the power steering pump. If the lines go to a steering cylinder under the nose of the tractor then it is either a 4400 or a 4500. If they go to a cylinder on the left side of the tractor then it is an early 4000 and if they go up to the steering column then it is a later 4000.

Appreciate your response. First problem, the hood is missing altogether haha. The front axle is solid fixed width, kind of an upside down U section shape. Looking with poor lighting at night, I'm not yet sure where the steering lines are. I see no cylinder under the nose, I see no cylinder on the left side by what I think is the steering link coming from the steering column area.

I double checked my right side model number location, and it seems very clear to me that there's no numbers stamped and there's not too much paint nor corrosion to obscure them.

Really my main goal is to know that I'm buying the right parts. If all years will use the same parts, I guess I don't care exactly what I've got. I need an alternator (generator?), battery, plugs, air filter, unknown other parts to fix er up. Appreciate all help!
 
No stamped numbers generally means that the transmission was replaced at some point. The upside down U shaped solid front axle is what the 4400 had. It is also what the 35400 and 3550 has as well, but I don't think either of those would have that engine block casting number, so it is most likely a 4400.
 

Thanks for the info. Will I need to care what year I have when I order engine related parts? Or if they are all going to be the same then I'm still curious but I guess I don't care.
 
(quoted from post at 04:57:14 07/10/22) What engine is yours - gas or diesel? And
what parts do you need?

It's the 3 cylinder gas engine. I need an alternator, battery, plugs, air cleaner, probably some hoses and possibly the belt, along with whatever I will discover along the way.
 
If it's a gasser then it might have a 192 ci or 201 ci engine. The 4000 diesels were all 201's, but the early gassers were 192's. They switched them to 201 ci on 4/1/1968. Look down below that casting number on the engine, at the flat spot just above the oil pan for the engine serial number. It should be a 6 digit number preceded by a letter. If it starts with a D it is a 201, but if it starts with a P then it is a 192.
 

Of the numbers I have found, that is the hardest for me to read. It appears to be 5 digits only for me. I think it says 52270. I'm only certain about the last "270". I was told I cannot post photos until I have made 10 posts. If I make one filler post I should be able to? I feel like photos would prove to y'all that I'm not insane over here hahah
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top